The crushing and squeezing machine is mainly composed of front support, feed hopper, crushing, screw, filter screen, juice container, rear support, slag chute and other parts. The main component of the crusher is that the bottom diameter of the screw gradually increases along the direction of the slag outlet and the screw pitch gradually decreases. When the material is pushed by the screw, the material is squeezed due to the reduction of the spiral chamber volume. The rotation direction of the spiral spindle is clockwise when looking from the feed hopper to the slag chute. The raw materials are added into the feed hopper and pressed under the promotion of the screw. The squeezed juice flows into the juice container at the bottom through the filter screen, while the waste is discharged through the annular gap formed between the screw and the tapered part of the pressure regulator. The size of the gap can be adjusted by the axial movement of the pressure regulator. It is used clockwise (when the bearing seat of the hand wheel shaft is turned from the slag chute of the equipment to the feed hopper end, the pressure regulating head will turn to the left, and the gap will be reduced, otherwise, the gap will become larger.) Change the size of the gap, that is, adjust the slag discharge resistance. The slag yield can be changed, but if the gap is too small, some slag particles and juice will be squeezed through the filter screen together under the strong extrusion. Although the juice yield increases, the quality of the juice decreases relatively. The size of the gap should be determined according to the user's specific process requirements. Stainless steel spiral fruit and vegetable juicer is suitable for beating and separating various fresh fruits and vegetables. Products such as orange meat, grapes, macaques, mulberry fruits, red bayberry, honey peaches (seedless), etc. can be used to achieve the goal of making sauce, separating fruit kernels, fruit seeds, and thin skin, and separating vegetables (cut), tomatoes, peppers, celery (cut), etc. into vegetable pulp juice, separating vegetable tendons. It is an ideal machine for making jam, juice, and vegetable juice, and an important equipment for food processing enterprises.
