Equipment description:
This machine is used for squeezing all fruits and vegetables (stone fruits must be cored), especially for crushing and squeezing materials with high fiber content, such as ginger, wheat seedlings, etc. The equipment consists of ginger crusher and juicer. The main component is the crushing device installed on the feed hopper (consisting of the feed hopper, body, main shaft, flying knife, bottom knife, bearing seat, motor, etc.) During operation, the motor drives the main shaft to rotate through a pair of belt pulleys, and the material is cut by the high-speed flying knife. Due to the centrifugal force, it directly enters the spiral juice extraction system. The main component of spiral juice pressing is the spiral. The bottom diameter of the spiral gradually increases along the direction of the slag outlet and the screw pitch gradually decreases. When the material is pushed by the spiral, the volume of the spiral chamber decreases, forming the material pressing. The materials are pressed under the advance of the screw, the juice pressed by them flows into the juice container at the bottom through the filter screen, while the waste is discharged through the annular gap formed between the screw and the tapered part of the pressure regulator. The size of the gap and the juice yield can be adjusted by moving the pressure regulator along the axial direction.
